ARB 3468010 - Manual (Page 9)

Last Rev Date: 14 05 08 Page 9 of 21 Fitting instructions# 3786403
Copyright © 2005 by ARB Corporation Limited. All rights reserved, thi s document must not be reproduced without the express authority of ARB Corporation Ltd
18. When the part has been cut out to
suit a winch, refit back to vehicle using
new xmas tree clips supplied in bolt kit.
19. The next step is to fit bull bar mount
assembly to vehicle chassis.
20. These assemblies are left / right
handed.
21. Fit to vehicle using the two bolts that
hold the tow hooks to the front of the
chassis plates.
22. Fit one side at a time temporarily
using stone shield packers to fit
brackets against chassis plates.
( Finger tighten only ).
23. Fit stepped washer inside of chassis
rail and align hole in chassis rail and
chassis bracket, then fit stepped washer
into both holes.
PHOTO IS OF RHS OF VEHICLE