ARB 3468010 - Manual (Page 10)

Last Rev Date: 14 05 08 Page 10 of 21 Fitting instructions# 3786403
Copyright © 2005 by ARB Corporation Limited. All rights reserved, thi s document must not be reproduced without the express authority of ARB Corporation Ltd
24. Fit 12mm bolt and flat washer into
stepped washer from outside of chassis
bracket, into chassis rail of vehicle
25. To the inside of the vehicle chassis
rail, secure using 12mm spring washer
and 12mm nut, finger tighten only,then
tighten the two front bolts firmly first,
then tighten the rear 12mm bolt.
26. Carry out the same fitting procedure
on the opposite side.