ARB 3468010 - Manual (Page 19)

Last Rev Date: 14 05 08 Page 19 of 21 Fitting instructions# 3786403
Copyright © 2005 by ARB Corporation Limited. All rights reserved, thi s document must not be reproduced without the express authority of ARB Corporation Ltd
58. Adjust bar so it sits level on vehicle
and there is a 30mm gap on outside of
bar.
59. Once bar is tighten to the correct
adjustment, using a small drill or a right
angle drill, drill a 10mm hole using the
hole in mounting bracket as a template
through the upright of the bar.
60. Secure using 10mm hardware and
tighten to torque specifications.
61. When the bar is secured to the vehicle,
tighten the tow hook mount and refit tow
hook and tighten just enough so it does
not rattle.
LIGHTING ASSEMBLY HAS BEEN
REMOVED FOR CLARITY
BOLT ASSEMBLY TO USE