ARB 3468010 - Manual (Page 11)

Last Rev Date: 14 05 08 Page 11 of 21 Fitting instructions# 3786403
Copyright © 2005 by ARB Corporation Limited. All rights reserved, thi s document must not be reproduced without the express authority of ARB Corporation Ltd
27. When both brackets are fitted to
vehicle, remove the front bolts.
28. Using 8mm hole in underside of
mounting bracket as a template, drill a
8mm hole (5/16”) into lower radiator
protector assembly flange.
29. Secure using 8mm hardware, then
tighten previously fitted 8mm bolt in
paragraph 12.
ABOVE ARROW INDICATES
FRONT BOLTS.