ARB 3468010 User Manual
Page 13
Last Rev Date: 14 05 08
Page 13 of 21
Fitting instructions# 3786403
Copyright © 2005 by ARB Corporation Limited. All rights reserved, thi s document must not be reproduced without the express authority of ARB Corporation Ltd
34. By using scotch loks, connect
35. Carry out the same function to both
sides of the vehicle, then refit light
assemblies back to vehicle.
36. Arrows point to bar indicator /
clearance light plugs.
TO FIT A WINCH BAR
37. To fit an 8/9/9.5/000lb winch, rotate
gearbox 72° counterclockwise.
Stand winch upright and undo the capped
head screws and by lifting the gearbox
only a couple of millimeters, rotate the
gearbox. Once in position, refit all screws
and tighten firmly.
WARNING: Do not lift gearbox more
than a couple of millimeters.
ORIGINAL
ROTATED
VIEWED FROM
LHS OF
VEHICLE
RED TO BROWN WIRE
GREEN TO BLUE WIRE
FROM THE MAIN LOOM
BLACK TO BLACK WIRE
PHOTO IS RHS LIGHT ASSEMBLY