ARB 3432150 - Manual (Page 5)

19-03-08 Page 5 of 21 3783182
VEHICLE PREPARATION
8. Remove the air shield form the vehicle,
and remove the ambient temperature
sender from the air shield.
Short loom .
Longer relay loom .
9. To wire up the indicators from the bull bar
to the vehicle indicators a short loom must
be fitted .
A longer loom with two relays is also to be
fitted in conjunction with the short turn
signal loom .
10. Open the bag containing the long wiring
loom with relays .
Lay the loom across the engine bay from
headlamp to headlamp with the relays on
the Left Hand ( battery ) side of
the vehicle .
Place the relays on the inner guard ( as
shown ) as close as possible to the
battery .
Using a drill and a Phillips head bit attach
the relays to the vehicle with the screws
provided .
Note :- Ensure wiring will not rub on
any metal part or sharp edges .