ARB 3432150 - Manual (Page 18)

19-03-08 Page 18 of 21 3783182
BULL BAR FITMENT
62. Attach the washer bottle bracket without
the cage nuts to the right hand side
impact absorber using two M8 x 20mm
bolts, M8 flat and spring washers.
63. On vehicles equipped with air suspension,
attach the solenoid pack to the bracket.
64. Carefully bend the bracket that holds the
temperature sensor to 90 degrees.
65. Re-install the ambient temperature sensor
to the right hand side impact absorber
using a M8 x 20mm bolt, M8 flat washer
and M8 flange nut.
66. With the help of another person, lift the
bull bar into position and fix in place using
3 (a side) M10 x 35mm bolts, M10 flat
washers, M10 spring washers and M10
flange nuts. Do not tighten.
Mount sensor here
Bend the bracket
along the crease line
to 90 degrees