ARB 3432150 - Manual (Page 15)

19-03-08 Page 15 of 21 3783182
WINCH FITMENT
45. Remove the cir-clips from the bottom of
the vertical rollers of the fairlead and push
the pin upwards. Push the vertical rollers
inwards und using two 3/8” x 1 ¾” bolts
M10 flat and spring washers, attach the
roller fairlead to the bar.
46. Replace the circlips on the vertical rollers.
47. Insert the two rubber grommets into the
top face of bull bar.
48. Attach the control box to the control box
bracket.
49. Fit the control box to the bar with two M8
x 20mm bolts, M8 flat washers and M8
flange nuts.