Off Road Unlimited 60013 2001-08 GM 2500-3500 HD 4WD 4-Link Coil-Over w/Solid Axle Conversion Kit - Manual (Page 30)

ORU- GM 4 Link Coil-Over Conversion Kit #60013
39) Remove factory rear brake line between frame and axle.
40) Remove factory leaf springs.
41) Cut factory lower shock mounts from axle and grind tube smooth.
42) Install new springs with factory bolts (do not tighten until weight is on vehicle!).
43) Install rear axle with new blocks and u-bolts and tighten.
44) Drill ¼" holes on rear of driver side spring pad and front inside of u-bolt plate to re-secure brake hard
line and parking brake cable. Tap both holes to 5/16" coarse and secure brackets with 5/16" x ¾" bolts
(photos 37 & 38).
Photo 37
Photo 38
offroadunlimited.com
page 29
Front of
vehicle
Driver side
spring pad