Off Road Unlimited 60013 2001-08 GM 2500-3500 HD 4WD 4-Link Coil-Over w/Solid Axle Conversion Kit - Manual (Page 15)

ORU- GM 4 Link Coil-Over Conversion Kit #60013
8) Place (2) ½” x 3-3/4” bolts with thick flat washers through coil over bracket upper holes and place 1’
diameter x 2-1/16” long crush sleeves over bolts. Attach bracket loosely to frame with ½” lock nuts and
thick flat washers. Install (1) ½” x 1-3/4” bolt with thick flat and lock washer through bottom of frame into
previously installed front nut tab only and tighten all bolts (photos 8-10).
9) Locate driver bump stop mounting bracket #60013-3. Attach bracket to coil over bracket with ½” bolt
through bottom of frame into nut tab and (3) 3/8" bolts with flat and lock washers to coil over mount and
tighten (photo 9).
10) Place filler plates in upper control arm pockets (you may need to bend the pocket open for clearance).
Insert the ½” x 3-1/2” bolt with flat washers and lock nut in the rear pocket only and tighten (photo 10).
Photo 8
Photo 9
offroadunlimited.com
page 14