JLG 534D-10 Parts Manual - Manual (Page 127)

91344005 534D-9/534D-10 3-63
ATTACHMENTS
Figure 3-17 Forks
Item Part Number Qty. Description Rev.
90600390 2 48 IN CUBING FORK, 2X2, 3,000 lbs.
2340037 2 48 IN CUBING FORK, 2X2, 3,800 lbs. A
90553008 2 48 IN PALLET FORK, 1-3/4X4, 5,000 lbs., (used on 6 ft swing mast only,
90455047)
90601819 2 48 IN PALLET FORK, 1-3/4X6, 9,000 lbs.
90453002 2 48 INPALLET FORK, 2X4, 8,000 lbs.
90453048 2 48 IN PALLET FORK, 2.25X4, 10,950 lbs.
2340045 2 48 IN PALLET FORK, 2.36X4, 10,950 lbs. A
2340038 2 48 IN PALLET FORK, 2.36X5, 13,700 lbs. A
90553005 2 48 IN PALLET FORK, 2X6, 10,000 lbs.
90601015 2 60 IN PALLET FORK, 2X6, 10,000 lbs.
91163269 2 60 IN PALLET FORK, 2X6, 11,300 lbs.
90453045 2 60 IN PALLET FORK, 2X6, 11,300 lbs., (used on 6 ft swing mast only,
90455054)
2340039 2 60 IN DUAL TAPER FORK, 2.36X6, 16,300 lbs. A
90553018 2 72 IN PALLET FORK, 2X6, 10,000 lbs.
91123132 2 72 IN PALLET FORK, 2X6, 10,000 lbs.
H0453002 2 96 IN PALLET FORK, 2X6, 7,500 lbs. loaded center
2340046 2 60 IN DUAL TAPER FORK, 1.75X7, 10,800 lbs. A
1001092391 2 72 IN DUAL TAPER FORK, 2X6, 11,300 lbs. A
N1 Note Ref FORKS RATED LESS THAN ATTACHMENT OR MACHINE’S CAPACITY
DECREASES CAPACITY OF THE ATTACHMENT OR MACHINE TO THAT OF
THE FORKS. FORKS RATED MORE THAN THE ATTACHMENT OR
MACHINE’S CAPACITY DO NOT INCREASE ATTACHMENT OR MACHINE’S
CAPACITY.
N2 Note Ref PLEASE CONSULT THE JLG PARTS DEPARTMENT TO DETERMINE THE
CORRECT FORKS APPLICABLE TO YOUR SPECIFIC CARRIAGE
ASSEMBLY & APPLICATION.