Bosch VIDEOJET X40 - Manual (Page 88)

88 en | Configuration Using a Web Browser VideoJet X40
V3.5 | 2007.12 Installation and Operating Manual Bosch Security Systems
5.33 System State
The storage devices used by VideoJet X40 are monitored. If a storage device is no longer
available for recordings, for example due to a technical defect, a Failed message will be
displayed in this window. You can reset the error message to establish whether the error still
exists.
5.34 Licenses
You can enter the activation key to enable additional functions or software modules in this
window.
i
NOTICE!
The activation key cannot be deactivated again and is not transferable to other units.