beautypg.com

Bosch VIDEOJET X40 User Manual

Page 73

background image

VideoJet X40

Configuration Using a Web Browser | en

73

Bosch Security Systems

Installation and Operating Manual

V3.5 | 2007.12

5.26.3

Relay follows

If required, select a specific event that will trigger the relay. The following events are possible

triggers:

Off

Relay is not triggered by events

Connection

Trigger whenever a connection is made

Video alarm

Trigger by interruption of the video signal at the corresponding input

Motion alarm

Trigger by motion alarm at the corresponding input, as configured on the VCA page (see

Section 5.23 VCA, page 65)

Local input

Trigger by the corresponding external alarm input

Remote input

Trigger by remote station's corresponding switching contact (only if a connection exists)

5.26.4

Relay name

You can assign a name for the relay here. The name is shown on the button next to Trigger

relay. The Livepage can also be configured to display the name under the relay icon.

5.26.5

Trigger relay

Click the button to trigger the relay manually (for testing or to operate a door opener, for

example).

i

NOTICE!

The numbers in the lists of selectable events relate to the corresponding connections on the

unit, Video alarm 1, for example to the Video In 1 connection.