Bosch VIDEOJET X40 - Manual (Page 65)

VideoJet X40 Configuration Using a Web Browser | en 65
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
5.23 VCA
The VideoJet X40 features an integrated video content analysis (VCA), which can detect and
analyze changes in the signal. Such changes can be due to movements in the camera's field of
view.
You can configure the video content analysis for each video input individually.
1. Click one of the tabs to open the configuration of the corresponding video input.
2. Enter the desired settings.
3. Click the Default button to return all settings to their default, if appropriate.
i
NOTICE!
If computing power becomes short, the highest priority is always the live images and
recordings. This can lead to impairment of the video content analysis. You should therefore
observe the processor load and optimize the encoder settings or the video content analysis
settings as necessary (see Section 8.5 Processor Load, page 115).