Brother DCP-9055CDN - Manual (Page 37)

29
6
6
Scanning a document
6
There are several ways to scan documents.
You can use the
(Scan) key on the
machine or the scanner drivers on your
computer.
a
To use the machine as a scanner, install
a scanner driver. If the machine is on a
Network, configure it with a TCP/IP
address.
 Install the scanner drivers on the
Installation CD-ROM. (See the Quick
Setup Guide and Scanning in the
Software User's Guide.)
 Configure the machine with a TCP/IP
address if network scanning does not
work. (See Configuring Network
Scanning in the Software User's
Guide.)
b
Load your document. (See How to load
documents on page 25.)
 Use the ADF to scan multiple pages
of documents. It feeds each sheet
automatically.
 Use the scanner glass to scan a
page of a book or one sheet at a
time.
c
Do one of the following:
 To scan using the (Scan) key,
go to Scanning using the scan key
on page 29.
 To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver on page 30.
Scanning using the
scan key
6
For more information, see Using the Scan
key in the Software User's Guide.
a
Press the (Scan) key.
b
Choose the scan mode you want.
Scan to:

File

E-mail

OCR
1

Image

FTP

Network
1 (Macintosh users)
Presto! PageManager must be downloaded
and installed before use. See Accessing
Brother Support (Macintosh) on page 4 for
further instructions.
c
(For network users)
Choose the computer you want to send
the data to.
d
Press Mono Start or Colour Start to
begin scanning.
How to scan to a computer
6