Brother DCP-9055CDN - Manual (Page 125)

Menu and features
117
C
Level 1 Level 2 Level 3 Level 4 Options Descriptions
4.Network 1.TCP/IP 1.Boot Method
—
Auto
*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best suits
your needs.
2.IP Address
— [000-255]. [000-255].
[000-255]. [000-255] Enter the IP address.
3.Subnet Mask
— [000-255]. [000-255].
[000-255]. [000-255] Enter the Subnet
mask.
4.Gateway
— [000-255]. [000-255].
[000-255]. [000-255] Enter the Gateway
address.
5.Node Name
—
BRNXXXXXXXXXXXX
Enter the Node name.
6.WINS Config
—
Auto
*
Static
Chooses the WINS
configuration mode.
7.WINS Server
—
Primary
[000-255]. [000-255].
[000-255]. [000-255]
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP
address of the
primary or secondary
WINS server.
8.DNS Server
—
Primary
[000-255]. [000-255].
[000-255]. [000-255]
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP
address of the
primary or secondary
DNS server.
9.APIPA
—
On
*
Off
Automatically
allocates the IP
address from the link-
local address range.
0.IPv6
—
On
Off
*
Enable or Disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://solutions.brother.com/
for more information.
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.