Brother DCP-9055CDN - Manual (Page 33)

25
3
3
How to load
documents
3
You can make copies, and scan from the ADF
(Automatic Document Feeder) and the
scanner glass.
Using the automatic
document feeder (ADF)
3
The ADF can hold up to 35 pages and feeds
each sheet individually. Use standard 80 gsm
paper and always fan the pages before
putting them in the ADF.
Document Sizes Supported
3
How to load documents
3
IMPORTANT
• DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper-
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
• To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
Note
• To scan documents that are not suitable
for the ADF, see Using the scanner glass
on page 26.
• It is easier to use the ADF if you are
loading a multiple page document.
• Make sure documents with correction fluid
or written with ink are completely dry.
a
Unfold the ADF document support (1)
and the ADF document output support
flap (2).
b
Fan the pages well.
c
Place your document face up, top edge
first in the ADF until the LCD display
message changes and you feel it touch
the feed rollers.
d
Adjust the paper guides (1) to fit the
width of your document.
Loading documents
3
Length: 147.3 to 356.0 mm
Width: 147.3 to 215.9 mm
Weight: 64 to 90 gsm
1
2
1