Philips DVDR985A99 - Manual (Page 37)

Installation: VCR Plus+ Ch. 37
If you intend to use the VCR Plus+ programming system, program the
DVD Recorder with your local channel information. This will only take a
few minutes. Since the channel numbers of the stations you receive may
not be the same as the station numbers, and since channel numbers differ
from area to area, you must set up channels in order for the system to
work efficiently.
Before you begin, make sure you have 1) a cable TV channel list, if applica-
ble (you can request one from your cable TV company), and 2) a chart that
lists VCR Plus+ channel numbers, which you can find in your TV guide or
the TV listings of your local newspaper.
1 Press SYSTEM MENU. may be selected. If it is not, press ;
to select it.
2 Press 9 repeatedly to select , then press : to enter the
Installation menu.
3 Press 89 to select VCR Plus+ Ch. (channel), then press :.
4 Press 89 to select a VCR Plus+ Ch. number, then press
the Number buttons or ; : to enter the corresponding
Channel number from your TV guide list. If you use the
Number buttons, enter the channel number as a three-digit number.
For example, for channel 18, press 0,1,8.
Refer to the list from your local newspaper or TV guide for the
VCR Plus+ channels and corresponding TV channel numbers for
your area. These are the numbers you will enter as the Channel
number as you complete the chart on the screen.
5 Press OK to store the Channel number. Repeat steps 4-5 as
often as necessary to complete the chart.
6 When you are finished, press SYSTEM MENU repeatedly to
remove all the menus.
MONITOR ON/OFF
REC/OTR NEXT PREVIOUS
REVERSE PAUSE SLOW FORWARD
STOP FSS PLAY
CLEAR
CH
SELECT
TIMER
T/C
ZOOM ANGLE SUBTITLE AUDIO
DIM REPEAT REPEAT SCAN
A/CH
MUTE
VOL
1,6
5
2-4
4
Installation
Auto Ch. Programming
K Add/Delete Channels
u B VCR Plus+ Ch. B
L Time/Date
Cable/Antenna
To exit press
SYSTEM MENU
Installation
VCR Plus+ Ch.
VCR Plus+ Ch. Channel
K K ...
u 001 s 018 B
L 002 -- -- --
003 -- -- --
004 -- -- --
005 -- -- --
L... To store
Press OK