Philips FWR33 - Manual (Page 29)

Clock setting
Manual clock setting
1 Press 2 STANDBY·ON as often as necessary on the unit
to switch the unit to standby.
2 Press CLOCK·TIMER on the unit.
3 Rotate í JOG CONTROL ë to select the clock.
➜
CLOCK is displayed and X starts blinking.
4 Press YES to confirm the selection.
➜ The digit for the day of the week blinks.
5 Rotate í JOG CONTROL ë to set the day.
6 Use à SEARCH or á SEARCH on the unit to move
from day of the week to hour.
7 Rotate í JOG CONTROL ë to set the hour.
8 Repeat steps 6 and 7 to set the minutes.
9 Press YES to confirm the settings.
Timer functions
You can select 2 timer functions which will be activated at a
chosen time: alarm timer and sleep timer. Make sure the
clock is set before using one of these features.
Alarm timer setting
The unit can be used as an alarm clock, whereby the tuner,
CD changer or CD recorder starts playback automatically
at a preset time.
1 Follow steps 1 and 2 of “Manual clock setting”.
2 Rotate í JOG CONTROL ë to select the alarm timer.
➜
ALARM is displayed and
ALARM is blinking.
3 Press YES to confirm the selection.
➜ The hour digit will blink.
4 Rotate í JOG CONTROL ë to set the hour.
5 Use à SEARCH or á SEARCH on the unit to move
from hour to minutes.
6 Rotate í JOG CONTROL ë to set the minutes.
7 Press YES to confirm the time settings.
8 Rotate í JOG CONTROL ë to select the source you
want to be woken up with.
9 Press YES on the unit to confirm the source selection.
Switching the alarm timer on/off
● Press TIMER ON/OFF on the remote control repeatedly to
switch the alarm timer on or off:
➜ ALARM is shown and
ALARM ON is displayed: the alarm
timer is switched on.
➜ ALARM goes off and ALARM OFF is displayed: the alarm
timer is switched off.
0 0
To stop the alarm press 2 STANDBY·ON on the unit.
Sleep timer
You can set a certain period of time before the unit
switches off.
1 Press SLEEP repeatedly on the remote control until the
desired sleeper time is displayed.
➜ SLEEP is shown and
SLEEP 15 MIN, 30 MIN,
45 MIN, 60 MIN or SLEEP OFF is displayed.
2 As soon as the desired time is displayed, do not press
SLEEP again.
➜ After the chosen time has elapsed, the unit switches to
standby.
● To deactivate the sleep timer, press SLEEP on the remote
control until
SLEEP OFF is displayed.
Clock and timer
26
English
CD CHANGE
OPEN•CLOSE
STANDBY•ON
ECO POWER
DISPLAY
CLOCK•TIMER
CD RECORDER
CDR OPEN•CLOSE
MASTER
VOLUME
COPY CD COMPILE
CD
RECORD
FINALIZE ERASE
JOG CONTROL
CD
SOURCE AUX TUNER
CDR CD1 CD2 CD3