Philips FWR33 - Manual (Page 22)

For internal recordings you can record from the internal
CD changer or tuner.
Recording a single track
Recording a single track during playback
1 Insert a CDR(W) that is absolutely free of scratches and
dust particles into the CD recorder tray.
2 Play your desired track on the CD changer.
3 Press RECORD on the unit to enter the recording menu.
➜
REC TR and the tracknumber are displayed.
4 Press either:
YES to start recording,
➜ The arrow lights, RECORDING IN SESSION is shown,
playback and recording start from the beginning of the
selected track and the actual recording time left starts to
count down.
or
NO to continue playback.
Recording an entire CD
High speed recording and automatic finalizing of
the current disc
1 Insert a CDR(W) that is absolutely free of scratches and
dust particles into the CD recorder tray.
2 Press either CD1, CD2 or CD3 to select the disc you wish
to copy.
3 Press COPY CD on the unit to enter the recording menu.
➜ The arrow starts blinking.The remaining recording time
of the CDR(W), the total playing time of the source CD
and
RECORD CD1 (or 2, 3)? are displayed.
4 Press YES to start recording and finalizing.
➜ The arrow lights, RECORDING IN SESSION is shown, high
speed recording at a low volume and finalizing start and
the actual recording time left starts to count down.
Note: If a program was already available before pressing
COPY CD, this will be ignored.
PROG goes off and the current
disc will be recorded. After finishing the recording, PROG is
shown and the program is available again.
Internal recording
19
English
COPY
CD COMPILE
CD
RECORD
FINALIZE
ERASE
JOG CONTROL
CD
DISPLAY
CLOCK•TIMER
CD RECORDER
CDR OPEN•CLOSE
MASTER VOLUME
COPY
CD COMPILE CD
RECORD
FINALIZE ERASE
JOG CONTROL
CD
SOURCE AUX TUNER
CDR CD1 CD2 CD3