Philips HTS3541-F7 - Manual (Page 49)

47 EN
Button Action
/
or
Alphanumeric
buttons
Select a preset radio station.
Navigation
buttons
Left/Right: Search for a radio
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation
of radio stations.
BACK Press and hold to erase the
preset radio station.
OPTIONS Manual:
1) Press OPTIONS.
2) Press / to select your
preset.
3) Press OPTIONS again
to store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
SUBTITLE Toggle between the stereo
and mono sounds.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. Switching
the tuning grid erases all preset radio stations.
1
Press RADIO.
2
Press .
3
Press and hold (Play) to toggle between
50 kHz or 100 kHz.
MP3 player
Connect a MP3 player to play audio files.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the
MUSIC
iLINK connector on your home theater.
2
Press AUDIO SOURCE repeatedly until
MUSIC I-LINK appears on the display
panel.
3
Press the buttons on the MP3 player to
select and play audio files.
Netflix
Use Netflix to stream movies and TV episodes
through your home theater. You can also rent
videos from online stores.
For more information on Netflix services, visit
www.netflix.com.
1
Connect your home theater to a home
network with high-speed Internet access
(see 'Connect and set up a home network'
on page 40).
2
Press (Home).
3
Select [Netflix], and then press OK.
» The Netflix home page is displayed.
4
Use the remote control to navigate and
start a video play.
» If you have not activated your home
theater to play videos from Netflix, an
activation code is displayed.
» If you have activated your home
theater, skip step 5.
5
On your computer, visit
www.netflix.com/activate to activate your
home theater with the activation code.
• You need to sign in as Netflix member..
6
To exit Netflix, press (Home).