Tune stations, Listen to radio, Mp3 player – Philips HTS3531-F7 User Manual
Page 20: Play music, Create mp3 files, Energy saving, Apply factory settings
18 EN
3
Select [Parental], and then press OK.
»
A message prompts you to enter the
password.
4
Enter the password with the Numeric
buttons.
5
Select an age rating, and then press OK.
•
To play all discs irrespective of the rating,
select level 8.
Lock disc
To restrict access to discs that are not encoded
with ratings and parental control, lock the disc
manually. You can lock upto 20 discs on your
home theater.
1
While playing a disc, press SETUP.
2
Select [General Setup], and then press OK.
3
Select [Disc Lock] > [Lock], and then press
OK.
»
A message prompts you to enter the
password.
4
Enter the password with the Numeric
buttons.
»
The disc is locked.
•
To play the locked disc, enter the password.
Energy saving
Save energy by changing the following settings.
Auto standby
When playing a disc or a USB storage device,
automatically switch your home theater to standby
if:
•
it is in pause or stop mode, and
•
no button is pressed for 30 minutes.
1
Press SETUP.
2
Select [General Setup], and then press OK.
3
Select [Auto Standby] > [On], and then
press OK.
Sleep timer
Set timers to switch the home theater to standby
after a specified time.
1
Press SETUP.
2
Select [General Setup], and then press OK.
3
Select [Sleep Timer], and then press OK.
4
Select the duration of the sleep timer.
»
The sleep timer can be set up to 60
minutes. If the sleep timer is set to [Off],
it switches off.
5
Press OK to activate.
»
The home theater switches to standby
after the specified time.
Screen saver
Automatically switch your home theater to screen
saver mode if:
•
it is in pause or stop mode, and
•
no button is pressed for 10 minutes.
1
Press SETUP.
2
Select [General Setup], and then press OK.
3
Select [Screen Saver] > [On], and then press
OK.
Display panel
Change the brightness of the home theater display
panel.
1
Press SETUP.
2
Select [General Setup], and then press OK.
3
Select [Display Dim], and then press OK.
4
Select the brightness, and then press OK.
Apply factory settings
Reset your home theater to the default settings.
You cannot reset the parental control settings.
1
Press SETUP.
2
Select [Preference Setup], and then press
OK.
3
Select [Default], and then press OK.
4
Select [Ok], and then press OK.