Philips FWC555 - Manual (Page 4)

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer´s instructions.
8. Do not install near any heat sources such as radia-
tors, heat registers,stoves,or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety pur-
pose of the polarized or ground-
ing-type plug. A polarized plug has
two blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your
outlet,consult an electrician for replacement of the obso-
lete outlet.
10.Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles,and
the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer or sold
with the apparatus. When a cart is used,use cau-
tion when moving the cart/apparatus combination
to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into
the apparatus,the apparatus has been exposed to rain or
moisture,does not operate normally, or has been
dropped.
15.Battery usage CAUTION – To prevent battery leak-
age which may result in bodily injury or damage to the
unit:
● Install all batteries correctly, + and - as marked on the
unit.
● Do not mix batteries (old and new or carbon and alka-
line etc.).
● Remove batteries when the unit is not used for a long
time.
4 IMPORTANT SAFETY INSTRUCTIONS
Class II equipment symbol
This symbol indicates that the unit has
a double insulation system