Philips TSU600099 - Manual (Page 47)

ProntoProEdit 3.0 - User Manual Configuring a CCF
Philips Page 47 of 76
Device Properties
The Device Properties enable you to change the features of the devices in the
CCF. You can configure device actions, select a RF Extender for the device
and configure hard key actions per device. Device actions are executed
whenever the device is selected in the Device menu or the Home panel on
your ProntoPro.
You can define the following functions in the different tabs:
Tabs Functions
Action To create an alias to another command, to set a
delay, to assign IR codes, to add a beep, to add a
timer, to create a jump.
RF To select an Extender ID for the device you want to
operate using radio frequency (RF) signals.
Hard Keys To configure the hard key actions for the selected
device. For each hard key you can create an alias
to another command, set a delay, assign IR codes,
add a beep, add a timer and create a jump.
Opening the Device Properties
1 Click on next to the device you want to configure in the Configuration
view.
A list of panels appears.
2 Double-click the panel Properties.
The ‘Device Properties’ window appears.
See “ Programming ” on page 49 for instructions for programming devices and
hard keys.
See “ RF Settings ” on page 57 for instructions for selecting an Extender ID.