Philips TSU600099 - Manual (Page 48)

ProntoProEdit 3.0 - User Manual Configuring a CCF
Philips Page 48 of 76
Macro Group Properties
The Macro Group Properties enable you to change the features of the macro
groups in the CCF. You can configure macro group actions, select a RF
Extender for the macro group and configure hard key actions per macro
group. Macro groups can contain up to 255 macros and are used to execute a
list of commands instead of a single command.
You can define the following functions in the different tabs:
Tab Functions
Action To create an alias to another command, to set a
delay, to assign IR codes, to add a beep, to add a
timer, to create a jump.
RF To select an Extender ID for the macro group you
want to operate using radiofrequency (RF) signals.
Hard Keys To configure the hard key actions for the selected
macro group. For each hard key you can create an
alias to another command, set a delay, assign IR
codes, add a beep, add a timer, create a jump.
Opening the Macro Group Properties
1 Click on next to the macro group you want to configure in the
Configuration view.
A list of panels appears.
2 Double-click the panel Properties.
The ‘Macro Group Properties’ window appears.
See “ Programming ” on page 49 for instructions for programming macro
groups and hard keys.
See “ RF Settings ” on page 57 for instructions for selecting an Extender ID.