Philips 42PF9936-37B - Manual (Page 22)

18
Headphone
& Insert the plug into the headphone socket L as shown.
é Press ¬ on the remote control to switch off the internal
loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm. The
headphone socket has a 3.5 mm jack.
In the Sound menu select
Headphone volume to adjust the
headphone volume.
& Press the v button repeatedly or select SOURCE in the
Settings menu (see p. 7) to select AV1 , AV2 , AV3 , AV4 , DVI or
TV channels , according to where you connected your devices.
é Press the cursor up/down.
“ Press OK .
Remark: Most equipment (decoder, video recorder) carries out the
switching itself. This is however never the case with a computer
connected to the DVI input.
If you want to change to TV channels?
Enter the channel number of the TV channel which you want to
watch with the digit buttons.
To select connected devices
B
v Select
VCR DVD SAT AMP
OK
Ò
®
‡ π †
®
®
® ®
x
CBL
CC
l
l
v
2265.1 am 17-12-2003 13:27 Pagina 18