Philips 42PF9936-37B - Manual (Page 21)

17 17 17 17
DVI connector (AV5)
1 2
The DVI IN connector allows
- the following TV and monitor display modes:
EDTV 640/720 x 480p
720 x 576p
HDTV 1920 x1080i
VGA
640 x 480 60 Hz
SVGA 800 x 600 60 Hz
- uncompressed HD content
- encrypted or non encrypted signals.
Note: Only Single Digital Link DVI is supported.
& Connect the digital DVI output of your HD
device (e.g. PC, DVD player, Set Top Box..) to the
DVI IN connector of your TV.
é Connect the audio cable 2 of your HD device
(if audio is present) to the
AUDIO inputs of
your HD device and to the AUDIO R (right) and
L (left) inputs next to the DVI IN connector.
Notes:
- Proper working is only guaranteed with DVI compliant
consumer products.
- Digital devices from different manufacturers have the
possibility of differing output standards which may
cause difficulties for the television to properly display;
- If the set is cold, there may be a small “flicker” when
the set is turned on. this is normal, there is nothing
wrong with the set.
DVI is a specific digital input allowing
encrypted transmission of
uncompressed HD content. DVI
includes HDCP (high-bandwidth
digital content protection), which is
supported by Hollywood, satellite
providers, and most of the consumer
electronics industry. DVI is gaining
momentum and quickly becoming an
industry standard for the consumers
to view high-definition material while
keeping content protected.
& Connect the audio cable to the multi channel
Surround receiver and to
AUDIO OUT L and R
above the CENTER IN connector of your TV
1.
Note: turn off the TV and your surround receiver
before connecting them. Set the Surround receiver’s
volume to minimum.
é If you want the loudspeakers of your monitor to
act as center speaker, also connect an audiocable
to the multi channel Surround receiver and to
the
CENTER IN of your TV 2.
“ Select Center Input On in the Source menu.
See p. 7.
The loudspeakers of the TV will now only
produce center sound, the loudspeakers
connected to the audio receiver will produce
Surround Sound.The volume has to be
controlled via the multi channel Surround
receiver.
Note: No sound will be heard when a TV channel or
external source is blocked via the Channel Lock
menu (see TV, Channels menu, p. 11).
Multi channel Surround receiver
AUDIO
RECEIVER
2
1
2265.1 am 17-12-2003 13:27 Pagina 17