38 speaker channel setup – Philips DVD580MT User Manual

Page 38

38 Speaker Channel Setup

CHANNEL SETUP lets you select a surround sound effect or adjust the
speakers you connected to the Player.
If you connected the Player to a TV only or to a Stereo that is not Dolby
Digital or DTS compatible, adjust the DOWNMIX setting to achieve a
surround sound effect without having six speakers connected to the
Player.
If you connected the Player to a Multichannel Receiver (six-channel) as
described on page 14, adjust the individual speakers.

Press SYSTEM MENU.

Press 9 to select CHANNEL SETUP, then press OK.

Press 8 or 9 to select DOWNMIX (if you did not con-
nect the Player to a Multichannel Receiver) or to select
the speaker setting you want to adjust, then press :.
You can select a speaker setting only if DOWNMIX is OFF.

Press 89 to choose a setting for the selected item, then
press OK.

The following settings are available for each item:

●

DOWNMIX: LT/RT, STEREO, VSS, or OFF.

●

Choose LT/RT (left/right) if the Player is connected to a

Stereo that has a Dolby Pro Logic decoder.

●

Choose STEREO if you connected the Player to a Stereo,

but the Stereo is not Dolby Digital or DTS compatible. The
Player will provide a Dolby Digital or DTS surround sound
effect.

●

Choose VSS (Virtual Surround Sound) if you connected the

Player to a TV only and want the Player to provide a virtual
surround sound effect.

●

Choose OFF to disable all the DOWNMIX or surround

sound effect settings.

●

CENTER: Choose ON to hear sound from the center speaker.

To disable sound from the center speaker, choose OFF.

●

REAR: Choose ON to hear sound from the rear/surround

speakers. To disable sound from these speakers, choose OFF.

●

SUBWOOFER: Choose ON to hear sound from the sub-

woofer. To disable the subwoofer sound, choose OFF.

●

CNTR DELAY (center delay): Choose a delay time for the

Center speaker in milliseconds (1-5 milliseconds), or select OFF
for no speaker delay.

●

REAR DELAY: Choose a delay time for the Rear/Surround

speakers in milliseconds (3-15 milliseconds in three second incre-
ments), or select OFF for no speaker delay.

●

TEST TONE: Select ON to check your speakers. If all the

speakers are connected correctly, you should hear a “hissing”
sound from each speaker during the test. Choose OFF when you
want to stop testing the speakers. (Make sure the volume is not
muted at the Receiver. If the volume is muted, you will not hear
the test tone through the speakers.)

Press SYSTEM MENU to remove the menus.

• Your Receiver may refer to the

Surround speakers as the Rear
speakers. These are the same.

Helpful Hint

1,5

2-4

SET STEREO DOWNMIX

-- CHANNEL SETUP PAGE --

DOWNMIX

LT/RT

CENTER

STEREO

REAR

VSS

SUBWOOFER

OFF

CNTR DELAY

REAR DELAY

TEST TONE