Philips DVD580MT - Manual (Page 34)

34 TV Display
You may set the Player to display video in one of three formats:
Letterbox, Pan & Scan, or Wide. The TV Display you select must be
available on the DVD. If not, the TV Display setting will not affect the
picture.
1
Press SYSTEM MENU.
2 GENERAL SETUP will be selected. Press OK.
3 TV DISPLAY will be selected. Press :.
4 Press 8 or 9 to select NORMAL/PS, NORMAL/LB, or
WIDE, then press OK.
● Select NORMAL/PS (panscan) if you have a regular TV and want
both sides of the picture to be trimmed, or formatted to fit
your TV screen. This setting is possible only if the DVD contains
pan & scan material. Check the DVD case for details.
● Select NORMAL/LB (letterbox) if you have a regular TV and
want to see the picture with black bars at the top and bottom
of the screen.This looks like the picture you see when watching
movies in a theater. This setting is possible only if the DVD con-
tains letterbox material. The DVD case may say the DVD is in
Letterbox or Widescreen format.
● Select WIDE if you have a widescreen TV.
5
Press SYSTEM MENU to remove the menus.
NORMAL TV PAN SCAN
--- GENERAL PAGE ---
TV DISPLAY NORMAL/PS
PIC MODE NORMAL/LB
ANGLE MARK WIDE
OSD LANG
SCR SAVER
MAIN PAGE
• Some widescreen TVs may
show only part of the Player’s
System Menu. This is not an
error of the Player settings.
Adjust the screen mode on
your TV. See your TV owner’s
manual for details.
Helpful Hint
1,5
2-4