BenQ HDR-16EP - Manual (Page 9)

9
4-3 Display Mode
The 7 icons on the bottom of the Main Screen are Display Mode selections.
The 7 icons are 4 splits, 6 splits, 8 splits, 9 splits, 10 splits, 13 splits, and 16 splits.
The default display mode is 16 splits. The camera displayed on each split mode
could be modified through the system setting menu.
Besides the different kinds of split modes as mentioned above, user could use
mouse to click any split screen to show the full screen of that specific camera as
the figure below.
In the full screen mode, the “Company name: Hunt” on the bottom of the screen
will be replaced by the “Screen Adjustment Parameters”, which are “brightness”,
“contrast”, “chroma”, and “saturation”.\
In the full screen mode, on the lower right of the screen, it will pop up the PTZ
control icons, which include “Zoom in”, “Zoom out”, “Auto Focus”,
“Focus Near”, “Focus Far”, “PTZ Speed”.
Remark: Only when there is Speed Dorm connected, the PTZ control icons will
show up.
Zoom Out
Contrast
Chroma Saturation
Brightness
Focus Far
Focus Near
Auto Focus
PTZ Speed
Zoom In