6-2 camera setup – BenQ HDR-16EP User Manual
Page 16
16
4-6-2 Camera
Setup
1. Please select the camera you would like to do
the setting.
2. Camera Name: You could use the “keyboard
figure” icon on the right of “Camera Name”
column to key in the description for the
camera.
3. Enable/Disable:
If the channel is not connected to camera,
please set “Disable”. If it’s connected, please set “Enable”.
4. Video Format: The video format of 16
cameras must be the same. Therefore, no
matter which camera you choose for setting,
all the camera settings will be changed to the same as the setting you make on
that camera.
Options: NTSC
、PAL、SECAM
The Video Format of each country is different. Please adjust the setting