BenQ HDR-16EP - Manual (Page 19)

19
4-6-3 View Setup
Click “Split” icon, it will display the view setup screen as follows.
For the 7 display modes mentioned in the section 4-3, the display content is setup
through the “Split” icon on the screen above.
For the table above, there are 4 splits, 6 splits, 8 splits, 9 splits, 10 splits, 13 splits,
16 splits setting screen. Please click the “small block” on the split screen, then you
could modify the camera showed on each split screen.
On the right side of the table, it’s an example for the description of the 16 cameras
when doing the view setup.