BenQ HDR-16EP - Manual (Page 14)

14
4-6 System Settings
4-6-1
、Enter System Settings Screen
1. Click the System Setting icon. System will show a screen as follows for user
to key in the username and password.
2. Use mouse to click the “keyboard” icon on the right of the “User Name”
column. System will show up a “keyboard figure” as follows for user to key in
the username (the pre-set username is “admin”). If the false data is entered,
click the “Clear” icon to delete the old data, then key in the new data again.
After finishing the operation, click the ”OK” button.
3. Use the same way as above to key in the password (The pre-set password is
“1111”.
Click here to enter the
system setting screen