Brother MFC 8840D A - Manual (Page 176)

9 - 1 BROTHER NETWORK PC-FAX SOFTWARE
9
Enable Network PC-FAX
To use the MFC as a Network PC-FAX, the NC-9100h Network
board should be installed into the MFC and configured with TCP/IP
and mail server settings if you use Scan to E-mail (E-mail server).
(See Using Brother PC-FAX software on page 6-1.)
Brother Network PC-FAX can be configured through PC-FAX Setup,
Sending tab.
Brother Network PC-FAX
software
(For MFC-8440 and MFC-8840D only)
The items described in this chapter are specific items relating to
the Network version of PC-FAX software that is installed from
the "Optional network applications" on the CD-ROM supplied
with your MFC.