Brewer Assist Power - Manual (Page 15)

Document # 99300 RevA 15 Printed in USA © 2008
MAINTENANCE
Preventative Maintenance
CAUTION
Failure to perform periodic inspections of the
table could result in personal injury or equipment
damage.
• Periodically inspect the electrical cord to ensure it is
free of cuts or damage.
• Inspect the mechanical functions to ensure satisfac-
tory operation.
• Check fasteners to make sure they are present and
tightened securely.
• Lubricate moving parts (such as back, tilt, and legrest
hinges) with a light machine oil.
• Have your authorized dealer inspect your table every
6 months.
Fuse Replacement
WARNING
Disconnect power by removing plug from the 115V
outlet before changing fuses.
1. Remove Seat/Back upholstery shown in Figure 7.
2. Locate fuse cover in round hole in seat back.
(Figure 23)
3. Pull out fuse cover with pliers.
4. Replace fuses using spare fuses in fuse cover. Fuse
type is 250V/2.5AT.
5. Reassemble.
CAUTION
The upholstery material is resistant to most medici-
nal type stains, but may be damaged by solvents
and dyes. Remove any spilled fluids from the up-
holstery immediately.
Clean the table weekly, wiping the painted metal and
plastic surfaces with a clean, soft cloth. If desired, mild
cleaners may be used.
Table Care
Figure 23. Fuse Location
Fuse