Brother DCP-J125 - Manual (Page 50)

36
Cannot Detect You installed a new ink cartridge
too quickly and the machine did
not detect it. Take out the new ink cartridge and
re-install it slowly.
If you are not using Genuine
Brother Innobella™ ink the
machine may not detect the ink
cartridge. Use a new Genuine Brother Innobella™
Ink Cartridge. If the error is not cleared, call
Brother Customer Service.
An ink cartridge is not installed
properly. Take out the ink cartridge and re-install it
slowly until it clicks. (See Replacing the ink
cartridges on page 32.)
Cannot Print
Replace Ink
One or more of the ink cartridges
have reached the end of their life.
The machine will stop all print
operations. Replace the ink cartridges. (See Replacing
the ink cartridges on page 32.)
Cover is Open The scanner cover is not
completely closed. Lift the scanner cover and then close it
again.
The ink cartridge cover is not
completely closed. Firmly close the ink cartridge cover until it
clicks.
Data Remaining Print data is left in the machine's
memory. Press Stop/Exit. The machine will cancel
the job and clear it from the memory. Try to
print again.
High Temperature The print head is too warm. Allow the machine to cool down.
Error Message Cause Action