beautypg.com

Step1 setting up the dcp, 1 removing the protective parts, 2 attaching the output paper support – Brother DCP4020C User Manual

Page 4: 3 attaching the paper tray, Setting up the dcp, Removing the protective parts, Attaching the output paper support, Attaching the paper tray, Step 1, 3attaching the paper tray

background image

2

Setting Up the DCP

1

Remove the protective tape.

Do NOT connect the USB cable.
Connecting the USB cable is done
when installing the driver.

1

Pull the scanner cover release lever to open
the scanner cover and lift it to the opening
position.

2

Attach the output paper support to the paper
output slot.

3

Close the output paper support and the
scanner cover.

4

Pull out the extension.

1

Insert the paper tray from above into the
back of the DCP.

1

Removing the Protective
Parts

2

Attaching the Output
Paper Support

Scanner Cover

Scanner Cover
Release Lever

Output Paper
Support

3

Attaching the Paper Tray

Output Paper
Support

Scanner
Cover

Output Paper
Support Extension

Paper Tray

Step 1

See also other documents in the category Brother Printers: