beautypg.com

Tuner mode, Auto search, Manual search – Barco R9002139 User Manual

Page 47

background image

Tuner Mode

A-3

5975039 BARCOVISION 508 100698

Auto Search

All channel information will be overwritten and the channel list will be

reorganised completely.

The projector scans the entire VHF and UHF band for the available

TV frequencies. It starts in the lower frequency range and it stores

each found frequency in another preselection in a consecutive order.

It takes around 2 to 3 minutes to complete the entire TV spectrum.

To start auto search, push the control disc up or down to select the

'Auto Search' function and press ENTER to select.

A warning will be displayed that all information will be overwritten.

Press ENTER to confirm and to start up the auto search action.

Select with or

then

to return.

TUNER SETUP

SYSTEM : B/G

ORGANISE CHANNEL LIST

MANUAL SEARCH

AUTO SEARCH

AUTO SEARCH

All channel information will

be overwritten !

The channel list will be

reorganised completely !

to confirm

to cancel

AUTO SEARCH

CHANNEL FREQUENCY :

X X X, X X X MHz

PRESELECTION : 1

When the first frequency is found, the auto search menu with the

frequency and the preselection indication will be displayed. While this

menu is visible, a projector will execute a small fine tuning for that

channel.

When the entire TV spectrum is finished, the projector goes back to

the beginning of the TV spectrum and when the first identical source

is found, it stops.

It is possible to reorganise the channel list to your wishes and to add

additional information to the channel list. See 'Organise Channel List'.

Manual Search

The desired channels can be search manually.

Highlight 'Manual Search' by pushing the control disc up or down and

press ENTER to display the manual search menu.

Select with or

then

to return.

TUNER SETUP

SYSTEM : B/G

ORGANISE CHANNEL LIST

MANUAL SEARCH

AUTO SEARCH

MANUAL SEARCH

CHANNEL FREQUENCY :

X X X, X X X MHz

PRESELECTION : 1

Use or to search

or for fine tuning.

Program the preselection

with numeric keys, then

to store

Press to return.

The last selected source will be displayed.

Push the control disc up or down to select the next available

frequency. When a channel frequency is found, it stops and displays

the frequency.

Fine tuning is possible by pushing the control disc to the right or to

the left.

The preselection indication will be blinking on the next available

preselection number. If this preselection is ok, press ENTER to store

the displayed image in that program location. If another preselection

is desired, press the corresponding digits with the numeric keys and

press ENTER to store the displayed image in that program location.

Press EXIT to return to the 'Tuner Setup' menu.

This manual is related to the following products: