Barco R9002139 - Manual (Page 40)

Service Mode
7-7 5975039 BARCOVISION 508 120198
R & B convergence mid
Item is password protected.
Highlight 'R & B convergence mid' with the control disc and press
ENTER to set all convergence settings to their midposition. A
confirmation screen will be displayed first.
Select with or
then
to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
R & B CONVERGENCE MID
Convergence settings
in current block
will be overwritten !
to confirm
to cancel
ENTER sets the convergence settings to their midposition. EXIT
cancels the procedure to set the convergence settings to their
midposition.
Undo R & B convergence mid
When "R & B convergence mid" is selected, all convergence settings
are set to their midposition. To cancel this action, select 'Undo R &
B convergence mid' by pushing the control disc up or down and press
ENTER. 'Undo R & B convergence mid' is displayed in the Memory
management menu in stead off 'R & B convergence mid' when this
latter is pressed.
An undo is possible as long as the projector is playing on the same
source (= same adjustment block) even when some adjustments are
already readjusted. When undo is presssed all settings are reset to
the previous settings.
Select with or
then
to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
UNDO R & B CONVERGENCE MID
GR CONVERGENCE MID
Green convergence mid
Only available when the projector is equipped with green conver-
gence adjustmentes.
Highlight 'Gr convergence mid' by pushing the control disc up or down
and press ENTER to switch off the green convergence.
Select with or
then
to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Undo green convergence mid
Only available when the projector is equipped with green conver-
gence adjustmentes.
The item 'Undo green convergence mid' will automatically be dis-
played when the green convergence is switched to midposition.
Press ENTER to switch on the green convergence.
Select with or
then
to return.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
UNDO GR CONVERGENCE MID