Barco R9002139 - Manual (Page 12)

Connections
3-3 5975039 BARCOVISION 508 120198
Input selection
a. with the RCU : press digit button 2 or
b. with the local keypad.
- press ADJUST key, the General access menu is displayed on the
screen.
- use the control disc to highlight 2.
- press ENTER to select the highlighted source.
GENERAL ACCESS
Select with ,
or
then .
to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6 7
3 4
1 2
Enter ADJUST
Connecting a RGB Analog source with composite sync.
RGB analog input terminals with composite sync input or with
sync on green. The projector detects automatically where the
sync signal is located.
Always use an interface when a computer and local monitor
have to be connected to the projector. Examples of interfaces
which can be applied :
Universal analog interface R9826100
6I6GPBÃPVU
DIQVU
RGBS (or RGsB) input selection
a. Press digit button 4 (or 5) on the RCU or
b. With the local keypad :
- Press ADJUST key, the General access menu is displayed on
the screen.
- Use the control disc to highlight 4 (or 5).
- Press ENTER to select the highlighted source.
GENERAL ACCESS
Select with ,
or
then .
to return
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
5 6 7
3 4
1 2
Enter ADJUST