Behringer DSP1200P - Manual (Page 36)

36
5.5 Operating level switch
To adapt the MODULIZER PRO to the used operating level, the unit can be switched between homerecording
level (-10 dBV) and professional level (+4 dBu). Use the LED bars on the frontpanel to determine the optimal
setting. The Level indicators should read somewhere between -10 and -6 dB, while the Clip LED should not
light up at all.
6. APPENDIX
6.1 Parameter overview
No. EFFECT VARIATION Edit A Edit B Edit C Edit D
1 Ultra Phaser LFO Speed * Intensity Depth Feedback
2 Spatial Phaser LFO Speed * Intensity Depth Feedback
3 Harmonic Exciter HP Shape Tune Harmonics
4 Auto Lowpass Mode (LFO, Auto 12/24 dB) Frequency Resonance Mod. Depth Env. / LFO Speed *
5 Auto Highpass Mode (LFO, Auto 12/24 dB) Frequency Resonance Mod. Depth Env. / LFO Speed *
6 Auto Bandpass Mode (LFO, Auto 12/24 dB) Frequency Resonance Mod. Depth Env. / LFO Speed *
7 Jetstream Flanger LFO Speed * Delay Depth Feedback Band Limit
8 Spatial Flanger LFO Speed * Delay Depth Feedback Band Limit
9 Ultra Chorus LFO Speed Delay Depth Stereo Width Wideness
10 Stereo Imager Xover Freq. Gain Spread Mono Pan. St. Center
11 3D Space Maker In / Out Gain Spread Xover Freq.
12 Denoiser Gate Thresh. Gate Hold Gate Rel. LP Freq. LP Depth
13 Ultra Ambience Pre Delay Size Wall Damp Stereo Width Reflections
14 Voice Canceler Bass Freq. Gain Bass Pan. Treble Pan.
15 Comp./Limiter Ratio Threshold Out Gain Attack Release
16 Expander Ratio Threshold Out Gain Attack Release
17 Noise Gate Threshold Hold Range Attack Release
18 Ring Modulator Mode (LFO, Auto, RND) Carrier Freq. LFO / Speed * Mod. Depth Band Limit
19 Vintager Clicks Level Noise Level Noise BP. Buzz Level Signal BP.
20 Tube Distortion Tube Type In Gain Low Cut High Cut Band Limit
21 Guitar Combo Type In Gain Drive Presence Speaker
22 Guitar Speaker Speaker Type Peak Freq. Peak Q Peak Gain HF Cut
23 Super Bass Frequency Density Ratio Bass Level
24 Resonator Mode (LFO, Auto, RND) Frequency LFO / Speed * Mod. Depth Feedback
* User/controller defined fixed/start value when set to 0
Tab. 6.1: Parameter overview for the different effect types
6. APPENDIX