Brother FAX 1570 MC - Manual (Page 69)

61
M E S S A G E C E N T E R
Setting Message Storage
Select the setting from the descriptions in Flexible Memory Settings.
1 Press Function , 8 , 1 . The screen prompts you to choose a FAX setting.
FAX:OFF
SELECT & SET
2 Press or to select ON (or OFF).
3 Press Set . The screen prompts you to choose a VOICE setting.
VOICE:ON
SELECT & SET
4 Press or to select ON, OFF or EXT.
5 Press Set when the screen displays your selection.
6 Press Stop to exit.
Recording Message Center
Outgoing Message
Recording the Message Center Outgoing Message (MSG CTR OGM) is the
second step you need to follow before you can turn on the Message Center. Make
sure your OGM is less than 20 seconds long.
1 Press Function , 8 , 6 . The screen prompts you to choose an OGM.
MSG CTR OGM
SELECT & SET
2 Press or to reach:
MSG CTR OGM
This is the only setting you can select if you want to turn the Message Center on.
3 Press Set .
4 Press Record , then pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time.
Please leave a message after the signal. If you wish to send a fax, please
press 5 1 and Start.
5 Replace the handset. The Message Center plays your OGM.
6 Press Stop to exit.
See
Record
Fax/Tel
Announcement
p. 34
See
Flexible
Memory
Settings
p. 60