Brother FAX 1570 MC - Manual (Page 58)

50
C H A P T E R S E V E N
Multiple Resolution Transmission
Use this feature to select separate resolution settings for each page of the fax
you’re sending. This could be useful if you’re sending a fax with photos and
letters, or some pages with small print and others with normal print. Resolution
settings return to STANDARD after the fax is sent.
1 Insert documents in feeder, then press Function , 1 , 5 .
2 Use or to select resolution for page 1, then press Set .
3 Repeat Step 2 for subsequent pages. Press Stop when you’re finished.
4 Enter the fax number you’re calling, and press Start .
Receiving Faxes
Operation from Extension Telephone
If you answer a fax call on an extension phone, you can make your FAX/MFC take
over by using the Activation Code. When you press the Activation Code
5 1 , the FAX/MFC starts to receive a fax.
If the FAX/MFC answers a voice call and double-rings for you to take over, use the
Deactivation Code
5 1 to take the call at an extension phone.
If you answer a call, and no one is on the line, assume you’re receiving a fax. At
the FAX/MFC phone, press
Start , then hang up. At an extension phone, press
5 1 , wait for fax receiving tones (chirps), then hang up. (Your caller will have
to press Start to send the fax.)
For F/T (Fax/Tel) Mode Only
When the FAX/MFC is in F/T mode, it will use the F/T Ring Time (double ringing)
to alert you to a voice call. If you’re at the FAX/MFC, you can lift the handset to
answer.
If you’re at an extension phone, you’ll need to lift the handset during the F/T
Ring Time and press
5 1 between the double rings. If no one is on the
line, or if someone wants to send you a fax, send the call back to the FAX/MFC by
pressing
5 1 .
See
F/T Ring
Time
p. 36
See
Easy Receive
pp. 34-35