Brother FAX 1570 MC - Manual (Page 31)

23
F A X S E T T I N G S
Changing One Touch and
Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where a
number is already stored, the screen displays the current name stored there, then
prompts you to either
1. CHANGE —OR— 2. EXIT.
1 Press 1 to change the number stored, or press 2 to exit without making a
change.
2 If you want to erase the number, press Clear when the cursor is to the far left
of the digits.
3 If you want to change a digit, use or to position the cursor under the
digit you want to change, then press Clear .
4 Enter a new number.
5 Follow the directions from Step 4 in Storing One Touch Numbers or Storing
Speed Dial Numbers.
Setting Up Groups
for Broadcasting
Groups allow you to send the same fax message to many fax numbers by pressing
only one One Touch key (Broadcasting). First, you’ll need to store each fax
number as a One Touch or Speed Dial number. Then, you can combine them
into a Group. Each Group uses a One Touch key. Finally, you can have up to 6
small Groups, or you can assign many numbers to one large group. If you have
Model MFC 1870MC you can assign up to 59 numbers to one large group, and for
Models FAX 1570MC and MFC 1970MC up to 123 numbers to one large group.
1 Press Function , 4 , 3 . The screen displays:
SELECT ONE-TOUCH
2 Select a One Touch key where you wish to store the number. (For example,
press One Touch key
02 to use as a group.)
3 Use the dial pad to enter the Group number (for example, press 1 for
Group 1).
SETUP GROUP:GO
ENTER & SET
See
Storing
One Touch
Dial
Numbers
pp. 20-21
and
Storing
Speed Dial
Numbers
p. 22