Brother DCP-770CW - Manual (Page 34)

Chapter 4
26
Making N in 1 copies or a
poster (page layout)
4
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also make a poster. When you use
the poster feature your machine divides your
document into sections, then enlarges the
sections so you can assemble them into a
poster.
Important
4
„ Please make sure paper size is set to
Letter
, Legal or A4.
„ You cannot use the Enlarge/Reduce
setting with the N in 1 and Poster features.
„ If you are producing multiple colour
copies, N in 1 copy is not available.
„
(P)
means Portrait and (L) means
Landscape.
„ You can only make one poster copy at a
time.
a
Load your document.
b
Enter the number of copies you want.
c
Press a or b to choose Page Layout.
d
Press d or c to choose Off(1 in 1),
2 in 1 (P)
, 2 in 1 (L),
4 in 1 (P)
, 4 in 1 (L) or
Poster(3 x 3)
.
Press OK.
e
If you do not want to change additional
settings, press Mono Start or
Colour Start to scan the page.
If you are making a poster, the machine
scans the pages and starts printing.
f
After the machine scans the page, press
+ (Yes) to scan the next page.
g
Put the next page on the scanner glass.
Press OK.
Repeat f and g for each page of the
layout.
h
After all the pages have been scanned,
press - (No) to finish.
Place your document face down in the
direction shown below.
„ 2 in 1 (P)
„ 2 in 1 (L)
„ 4 in 1 (P)
„ 4 in 1 (L)
„ Poster (3 x 3)
You can make a poster size copy of a
photograph.