Brother DCP-770CW - Manual (Page 19)

Loading documents and paper
11
2
Handling and using media
2
„ Store paper in its original packaging, and
keep it sealed. Keep the paper flat and away
from moisture, direct sunlight and heat.
„ The coated side of photo paper is shiny.
Avoid touching the shiny (coated) side.
Load photo paper with the shiny side
facing down.
„ Avoid touching either side of transparencies
because they absorb water and perspiration
easily, and this may cause decreased
output quality. Transparencies designed for
laser printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
Improper Setup
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped paper
1 2 mm or longer
• Extremely shiny or highly textured paper
• Paper already printed on by a printer
• Paper that cannot be arranged uniformly
when stacked
• Paper made with a short grain
Paper capacity of the output paper
tray
2
Up to 50 sheets of 20 lb Letter or 80 g/m
2
A4
paper.
„ Transparencies or photo paper must be
picked up from the output paper tray one
page at a time to avoid smudging.
1
1