Brother DCP-770CW - Manual (Page 16)

Chapter 1
8
Warning LED indications
1
The Warning LED (light emitting diode) is a
light that shows the status of the machine, as
shown in the table.
Printing Reports
1
The following reports are available:
„
Help List
A help list about how to quickly program
your machine.
„
User Settings
Lists your settings.
„
Network Config
Lists your Network settings.
How to print a report
1
a
Press Menu.
b
Press a or b to choose
Print Reports
.
Press OK.
c
Press a or b to choose the report you
want.
Press OK.
d
Press Mono Start.
LED DCP status Description
Off
Ready The DCP is ready for
use.
Red
Cover open The cover is open. Close
the cover. (See Error
messages on page 66.)
Ink empty Replace the Ink
cartridge with a new one.
(See Replacing the ink
cartridges on page 70.)
Paper error Put paper in the tray or
clear the paper jam.
Check the LCD
message. (See Error
messages on page 66.)
Other
messages Check the LCD
message. (See Error
messages on page 66.)
Enlarge/Reduce
Paper Type
Ratio:
Quality Normal
100%
Plain Paper
100%
Mem.