BT Domus - Manual (Page 30)

You can stop your BT Domus from
automatically dialling the switchboard
access number by switching the access
code off.
For security reasons you may not want
long numbers which may contain bank
account details, phonecard PIN
number etc… to be added to the
dialled calls list.
You can select to limit the number
digits to 17 by selecting the Short
redial length. This means that any
number longer than 17 digits will not
be stored in the Redial list.
Redial length
1. Press
Menu
, scroll to
Handset Settings
and press
Select
.
2. Scroll to
Redial Length
and press
Select
.
3. Scroll or to
Short
or
Long
then press
Select
.
4. Press
Back
to return to the previous menu level.
PABX access code
1. Press
Menu
, scroll to
Handset Settings
and press
Select
.
2. Scroll to
PABX Access Code
and press
Select
.
3.
Set Code
is highlighted, press
Select
.
4. Any current code is displayed. Press
Clear
to delete digits.
Enter the code you want then press
OK
.
5. Press
Back
to return to the previous menu level.
Switch PABX access code on or off
1. Press
Menu
, scroll to
Handset Settings
and press
Select
.
2. Scroll to
PABX Access Code
and press
Select
.
3. Press or to select
On
or
Off
then press
Select
.
4. Press
Back
to return to the previous menu level.
30 Handset settings
BT Domus – Issue 2 – Edition 4 – 22.08.07 – 8314
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
If your BT Domus is connected to a
switchboard, you may need to enter
an access code in the dialing sequence
to be able to connect to the outside
line e.g. 9.
The code will automatically be
dialled before any number from
the phonebook.
8314 Domus UG [Iss.2Ed.4] 22/8/07 10:17 Page 30