Belkin f5d7230-4 - Manual (Page 60)

58
Using the Web-Based Advanced User Interface
58
(1)
(2)
(3)
(4)
1.
Wi-Fi Protected Setup (WPS): Enabled or Disabled.
2.
Personal Identification Number (PIN) Method: In this method, a wireless
client wishing to access your network must supply a 4- or 8-digit PIN to
the Router. After clicking “Enroll”, you must start the WPS handshaking
procedure from the client within two minutes.
3.
Router PIN: If an external registrar is available, you may enter in the
Router’s PIN to the registrar. Click “Generate New PIN” to change the PIN
from the default value. Click “Restore Default PIN” to reset the
PIN value.
4.
Push Button Configuration (PBC) Method: PBC is an alternate method to
connect to a WPS network. Push the PBC button located on the back of
the Router for three seconds, and then initiate the PBC on the client device.
Alternatively, push the “Start PBC” soft button to start this process.
5.
Manual Configuration Method: This section lists the default security
settings if not using WPS.
The Router features WPA2, which is the second generation of the
WPA-based 802.11i standard. It offers a higher level of wireless security
by combining advanced network authentication and stronger Advanced
Encryption Standard (AES) encryption methods.