Belkin f5d7230-4 - Manual (Page 35)

33 32 33 32
Alternate Setup Method
se
ct
io
n
1
9
2
3
4
5
6
7
8
10
Setting your Internet Service Provider (ISP) Connection
Type to Static IP
A static IP address connection type is less common than other connection
types. If your ISP uses static IP addressing, you will need your IP address,
subnet mask, and ISP gateway address. This information is available from
your ISP or on the paperwork that your ISP left with you. Type in your
information, then click “Apply Changes”
(5)
. After you apply the changes,
the “Internet Status” indicator will read “connection OK” if your Router is
set up properly.
(1)
(2)
(3)
1. IP Address
Provided by your ISP. Enter your IP address here.
2. Subnet Mask
Provided by your ISP. Enter your subnet mask here.
3. ISP Gateway Address
Provided by your ISP. Enter the ISP gateway address here.